Select your language

ParaFuel Crude Oil Analyzer

ParaFuel™ Ruwe olie analyser

ParaFuel™ Ruwe olie analyser

Volledige ruwe olie monitoring

Of het nu in een raffinaderij, midstream, of een agentschap handhaving van de regelgeving, het meten van eigenschappen van ruwe olie snel en accuraat is van cruciaal belang. Het maakt niet uit waar in de ruwe olie industrie u zich bevindt, de ParaFuel™ Analyzer zal geoptimaliseerde kwaliteit, veiligheid en proces controle schema's mogelijk maken.

Kritische eigenschappen meten in Real-Time

Met de ParaFuel™ analyzer is het nauwkeurig meten van een breed scala aan ruwe olieproducten en eigenschappen eenvoudig. Ongeacht de analytische behoefte - mengproces van ruwe olie, beheer van pijpleidingen of validatie van de kwaliteit van verschepingen - de ParaFuel™ kan de klus klaren. U kunt lage kosten, snelle resultaten en minimale onderhoudsvereisten verwachten van het procesgehard ParaFuel™ online systeem.

Een veelzijdig instrument voor aardolieprocessen

Controleer al uw belangrijke eigenschappen in één enkele test die slechts enkele seconden duurt

  • Een brede waaier van in-process sondes en cellen beschikbaar voor elke procesconditie of materiaal.
  • Verkrijgbaar in versies met één kanaal, acht kanalen of 20 kanalen, zodat u de meeste meetwaarde uit één analyzer kunt halen.
  • Communicatieprotocollen van vrijwel elk type zijn beschikbaar. Of u nu integreert met een ouder systeem of een gloednieuw DCS, wij hebben de integratiemogelijkheden voor u.
  • Real-Time procesbeheersing met gebruik van resultaten om kritische procesparameters aan te passen.

Realize the Benefits of Real Time Analysis

Perfect for Real-Time Control

Analysis is nondestructive, automated and takes seconds, results sent to your DCS.

  • Crude Blending in real-time to optimize usage of lower cost crudes
  • Monitor Crude Oil grades in real time to manage inventory quality
  • Pipeline Crude testing for insertion and loading quality parameters

Real Time Process Analytics

LT-NIR Process Systems provide the same high-quality measurements as lab analyzers, directly in process. Monitor changing process conditions in real time and adjust as necessary. With the capability to measure 20 points with a single analyzer, gain knowledge of the whole process. Validate quality and performance at all stages—raw materials, intermediaries and final product. Design quality into your system.

Acidity (includes TAN)
API Gravity
Asphaltene Content
Vapor pressure
Asphaltene precipitation
TBP, EBP, & distillation points
Pour point
Aniline point
C/H Ratio
Freeze point
Total Aromatics
Cloud point
Emulsion stability
C# Distribution (C4-C18+)

Reliability in Critical Operations

With a high mean time between failures and the ability to be remotely serviced by Verum’s team of experts, the ParaFuelTM will be a long - lasting part of your process. The system can be placed in hot, cold, dusty, wet or hazardous areas with NEMA or IP enclosures rated to withstand your environment.


The ParaFuel Crude Oil Analyzers measure key chemical and physical properties rapidly and accurately. Laboratory or In-Process analyzers reduce lab expenses and increase your ability to control the process.
LT-NIR Process Systems provide for analysis directly in the process steam. Monitor changing product conditions in real time and adjust as necessary. With the capability to measure 20 points with a single analyzer, gain knowledge of the whole process.

  • Designed for 24-hour continuousoperation in industrial environments
  • Measure up to 20 process points using asingle analyzer
  • Probes suitable for any chemistry, hightemperatures, and high pressures
  • Self-cleaning design allows forcontinuous in-process use
  • Automation and communication softwarewith easy integration into existing controlsystems
  • Fully automated user interface
  • Remote diagnostic capability
  • Protection against dust, water, hot orcold, as well as classified environments


  • Processes designed with built-in quality
  • Improved control strategy
  • Continuous verification of quality andprocesses
  • Better data for risk assessment
  • Fast, non-destructive measurement
  • Integrate directly into an existing controlsystem
  • Real-time, automated results on a simpleinterface
  • Utilize the knowledge of a company withover 37 years’ experience developingand applying NIR analyzers

Technical Specifications

Analyzer Specifications:

  • Operation: Designed for Manual and Fully Autonomous use
  • Spectral range: 1200 – 2400 nm (other rangesavailable from 400 – 2400 nm)
  • Scanning speed: 2.5 scans per second
  • Measurement modes: Transmittance, Transflectance
  • Data interval: 1nm, 0.75nm, 0.5nm
  • Light geometry: F/2 High Speed Optics, Optimized forminimum specular reflectance and maximal S/N
  • Photometric noise: 10 μAU
  • Wavelength accuracy: 0.01 nm to traceable standard
  • Wavelength repeatability: 0.01 nm
  • Number of channels: up to 20
  • Power: 120V, 7 Amp, 60Hz or 220V, 3.6 Amp, 50 Hz
  • Dimensions (basic unit): 12” x 15“ x 13“ (HWD), 30.5cm x 39.7 cm x 34.9 cm (HWD)

I/O Communication

  • Protocols: Modbus RTU (Standard), 4-20mA Module,Modbus TCP, Custom Serial
  • Additional Hardware: Not required for Modbus RTU, 4-20mA comes with supplied channel hardware
  • Additional I/O: Alarms and custom I/O available

Fiber Optics

  • Fiber Type: Ultra Low OH Fused Silica Core, Silica Cladding,
  • Sheathing: 303 Stainless Steel Monocoil
  • Fiber count: 120 (60 transmit, 60 receive)
  • Minimal Bend Radius: 33 mm (multi-bundle)
  • Maximum Temperature: 400  F (200  C) Standard; 575 F (300  C) High Temperature Option (Continuous)


  • Environments: Class I, Div II, Zone2, IP66, othersavailable
  • Material: Stainless Steel or Painted Steel
  • NEMA Rating: 3R to 4X standard
  • Dimensions (vortex model): 30" x 30" x 24" (HWDtypical)
  • Power (vortex model): 120V 60Hz, Inrush 14 amp,Running 3.76 Amp, 8 amp class fuse, 220V available.
  • Dimensions (AC model): 30" x 36" x 24" (HWDtypical)
  • Power (AC model): 120V 60Hz, Inrush 16.42 amp,Running 3.76 Amp, 8 amp class fuse, 220V available.

Probes and Flow Cells

  • Maximum Temperature: 300  F (150  C)
  • Maximum Pressure: 1000 PSI
  • Dimensions: 1.3”x1.4”x1.4” (33. x 36.3x 35.6 mm)
  • High Temperature/Pressure Probes and Cells
  • Maximum Temperature: 650  F (350  C)
  • Maximum Pressure: 15,000 PSI

Probe Specifications

  • Fiber Connections: Verum Fiber Ferrule, SMA
  • Process Connections (Threaded): NPT, BSP orStraight (1/4” and larger); InGold 12mm and 25mm
  • Process Connections (Flanged): 150 lb Flange , 350 lbFlange (DIN or ANSI any size), Tri-Clamp
  • Materials: 304SS, 316SS, Hastelloy, Teflon, Custom