Select your language

ParaFuel Crude Oil Analyzer

ParaFuel™ Analizor de țiței

ParaFuel™ Analizor de țiței

Monitorizare completă a țițeiului

Fie că se află într-o rafinărie, midstream sau o agenție care aplică reglementările, măsurarea rapidă și exactă a proprietăților țițeiului este esențială. Indiferent de locul în care vă aflați în industria țițeiului, analizorul ParaFuel™ va permite sisteme optimizate de calitate, siguranță și control al proceselor.

Măsurați proprietățile critice în Timp Real

Cu ajutorul analizorului ParaFuel™, este ușoară măsurarea precisă a unei game variate de produse și proprietăți din țiței. Oricare ar fi nevoia analitică - Amestec brut, gestionarea conductelor sau validarea calității expedierii - ParaFuel™ poate face treaba. Vă puteți aștepta la costuri reduse, rezultate rapide și cerințe minime de întreținere de la sistemul online ParaFuel™ întărit prin proces.

Un instrument versatil pentru procesele petroliere

Monitorizați toate proprietățile cheie într-un singur test care durează doar câteva secunde

  • gamă largă de sonde și celule în proces disponibile pentru orice stare de proces sau material.
  • Disponibil în versiuni cu un singur canal, opt canale sau 20 de canale, astfel încât să puteți obține cea mai mare valoare de măsurare de la un analizor.
  • Sunt disponibile protocoale de comunicare de aproape orice tip.
  • Dacă vă integrați cu un sistem mai vechi sau cu un DCS nou, avem opțiunile de integrare pentru dvs.
  • Realizați controlul procesului în timp real folosind rezultatele pentru a ajusta parametrii critici ai procesului.

Realize the Benefits of Real Time Analysis

Perfect for Real-Time Control

Analysis is nondestructive, automated and takes seconds, results sent to your DCS.

  • Crude Blending in real-time to optimize usage of lower cost crudes
  • Monitor Crude Oil grades in real time to manage inventory quality
  • Pipeline Crude testing for insertion and loading quality parameters

Real Time Process Analytics

LT-NIR Process Systems provide the same high-quality measurements as lab analyzers, directly in process. Monitor changing process conditions in real time and adjust as necessary. With the capability to measure 20 points with a single analyzer, gain knowledge of the whole process. Validate quality and performance at all stages—raw materials, intermediaries and final product. Design quality into your system.

Acidity (includes TAN)
Asphalt
API Gravity
Asphaltene Content
Vapor pressure
Asphaltene precipitation
Viscosity
TBP, EBP, & distillation points
Methanol
N-Paraffins
Pour point
Hydrogen
Aniline point
C/H Ratio
SARA
Sulfur
Freeze point
Total Aromatics
Cloud point
Emulsion stability
C# Distribution (C4-C18+)
Density
Olefins
Olefins
Wax
Wax
Wax
CCR

Reliability in Critical Operations

With a high mean time between failures and the ability to be remotely serviced by Verum’s team of experts, the ParaFuelTM will be a long - lasting part of your process. The system can be placed in hot, cold, dusty, wet or hazardous areas with NEMA or IP enclosures rated to withstand your environment.

Features

The ParaFuel Crude Oil Analyzers measure key chemical and physical properties rapidly and accurately. Laboratory or In-Process analyzers reduce lab expenses and increase your ability to control the process.
LT-NIR Process Systems provide for analysis directly in the process steam. Monitor changing product conditions in real time and adjust as necessary. With the capability to measure 20 points with a single analyzer, gain knowledge of the whole process.

  • Designed for 24-hour continuousoperation in industrial environments
  • Measure up to 20 process points using asingle analyzer
  • Probes suitable for any chemistry, hightemperatures, and high pressures
  • Self-cleaning design allows forcontinuous in-process use
  • Automation and communication softwarewith easy integration into existing controlsystems
  • Fully automated user interface
  • Remote diagnostic capability
  • Protection against dust, water, hot orcold, as well as classified environments

Benefits

  • Processes designed with built-in quality
  • Improved control strategy
  • Continuous verification of quality andprocesses
  • Better data for risk assessment
  • Fast, non-destructive measurement
  • Integrate directly into an existing controlsystem
  • Real-time, automated results on a simpleinterface
  • Utilize the knowledge of a company withover 37 years’ experience developingand applying NIR analyzers

Technical Specifications

Analyzer Specifications:

  • Operation: Designed for Manual and Fully Autonomous use
  • Spectral range: 1200 – 2400 nm (other rangesavailable from 400 – 2400 nm)
  • Scanning speed: 2.5 scans per second
  • Measurement modes: Transmittance, Transflectance
  • Data interval: 1nm, 0.75nm, 0.5nm
  • Light geometry: F/2 High Speed Optics, Optimized forminimum specular reflectance and maximal S/N
  • Photometric noise: 10 μAU
  • Wavelength accuracy: 0.01 nm to traceable standard
  • Wavelength repeatability: 0.01 nm
  • Number of channels: up to 20
  • Power: 120V, 7 Amp, 60Hz or 220V, 3.6 Amp, 50 Hz
  • Dimensions (basic unit): 12” x 15“ x 13“ (HWD), 30.5cm x 39.7 cm x 34.9 cm (HWD)

I/O Communication

  • Protocols: Modbus RTU (Standard), 4-20mA Module,Modbus TCP, Custom Serial
  • Additional Hardware: Not required for Modbus RTU, 4-20mA comes with supplied channel hardware
  • Additional I/O: Alarms and custom I/O available

Fiber Optics

  • Fiber Type: Ultra Low OH Fused Silica Core, Silica Cladding,
  • Sheathing: 303 Stainless Steel Monocoil
  • Fiber count: 120 (60 transmit, 60 receive)
  • Minimal Bend Radius: 33 mm (multi-bundle)
  • Maximum Temperature: 400  F (200  C) Standard; 575 F (300  C) High Temperature Option (Continuous)

Enclosure

  • Environments: Class I, Div II, Zone2, IP66, othersavailable
  • Material: Stainless Steel or Painted Steel
  • NEMA Rating: 3R to 4X standard
  • Dimensions (vortex model): 30" x 30" x 24" (HWDtypical)
  • Power (vortex model): 120V 60Hz, Inrush 14 amp,Running 3.76 Amp, 8 amp class fuse, 220V available.
  • Dimensions (AC model): 30" x 36" x 24" (HWDtypical)
  • Power (AC model): 120V 60Hz, Inrush 16.42 amp,Running 3.76 Amp, 8 amp class fuse, 220V available.

Probes and Flow Cells

  • Maximum Temperature: 300  F (150  C)
  • Maximum Pressure: 1000 PSI
  • Dimensions: 1.3”x1.4”x1.4” (33. x 36.3x 35.6 mm)
  • High Temperature/Pressure Probes and Cells
  • Maximum Temperature: 650  F (350  C)
  • Maximum Pressure: 15,000 PSI

Probe Specifications

  • Fiber Connections: Verum Fiber Ferrule, SMA
  • Process Connections (Threaded): NPT, BSP orStraight (1/4” and larger); InGold 12mm and 25mm
  • Process Connections (Flanged): 150 lb Flange , 350 lbFlange (DIN or ANSI any size), Tri-Clamp
  • Materials: 304SS, 316SS, Hastelloy, Teflon, Custom
Clicky